Hello,
So to make it quick I am looking for nes dimensions. I have spent around 3 hrs looking for them but I couldnt find any. (Except for the main size of the box) I was wondering if anyone has that type of knowledge and is willing to help me out. I want those dimensions so i can model it for 3d printing So it would be helpful to have every dimension needed for that.
Thanks :)
Nintendo Entertainment System Dimentions
@snorlax: Here are some initial measurements I took of mine, which is a PAL Mattel version (probably no different than US etc, but might as well specify). A few things, the 43mm measurement includes the little creases either side, which are about 1mm either side, so those weird ridges that run across the top of the system are themselves about 41mm. Each is about 3mm wide and the gap between is the same and I'd say they're also about 3 or 4mm deep. That section is 124mm long and there are 21 ridged bars and 20 gaps. The flip up lid also mostly has about a 1mm gap around it, the right side of which is basically a continuation of gap on the left side of the ridged bit, but the hinge extends through that gap on either side, and that's what the 150mm measurement is, so that includes the 1mm that was excluded from the 182mm measurement, hence the disparity between the 182 and the 150+33. I don't know quite how to explain that not-terribly, but hopefully you get it!
I'll have time to do more later. This actually made me realise the system is a sliiiiightly different shape than I thought it was. I thought it was basically straight down at the front and back, and straight down at the sides until it hooks inward, but it's actually a little wider and longer around where the top and bottom of the shell meet by a couple of mm. Anyway, I can do the rest when I get a chance.
EDIT: Oh snap, beaten by a minute! Good to know the measurements line up though!
Log in to comment