I did the X-Clamp fix according to this and I have couple of problems. First when I use the intended amount of washers but the heatsinks don't make enough contant with the processors and the result is 2 Red Lights. When I use fair amount of washers, I get 3 Red Lights secondary code 0102 and in some cases 0020 when I tighten them too much.
Last time I did the fix, I used a different thermal compound than I'm using this time and it worked but overheated after a min then 1 lights E-74 error. So the thermal compound might be the problem or I just screwed up my motherboard?
Also I have a Luanch model if that helps.
Log in to comment